- This topic has 1 reply, 3 voices, and was last updated 17 years, 12 months ago by
.
- Posts
my gixxer is a bit tight through the gears, I’ll explain, when im powering up through the gears the bike refuses to change gear and you have do a double take on the gear stick, causeing me a few embarrassing moments,[
] this happens even when the bike is warmed up, she has just been serviced, (oil and filter) at the start it was in frequent, now it has become more frequent.as Pete said check chain tension as its pregressed from occasional to infrequent, also how many miles since the oil and filter change, and has it got semi or fully synthetic bike specific oil?
Does the lever move up but gear refuses to engage, or do you get little or no movement from lever and have to heft it up? Are you using clutchless shifting? And does it do it on a downchange?
If the chain/oil is ok then it may be worth checking the bolt in the centre of the selector drum cos if thats worked loose it can cause shifting problems.
Check clutch adjustment at pushrod end and make sure spline/footpeg assembly bolts are all nice and tight.
] this happens even when the bike is warmed up, she has just been serviced, (oil and filter) at the start it was in frequent, now it has become more frequent.
- You must be logged in to reply to this topic.